南澳產品 
NAYBL Zinc Oxide Arrestor Characteristics Test Device NAYBL氧化鋅避雷器測試儀
產品簡介
NAYBL氧化鋅避雷器測試儀是用于檢測氧化鋅避雷器電氣性能的專用儀器，該儀器適用于各種電壓等級的氧化鋅避雷器的帶電或停電檢測，從而及時發現設備內部絕緣受潮及閥片老化等危險缺陷。
NAYBL氧化鋅避雷器測試儀操作簡單、使用方便，測量全過程由單片機控制，可測量氧化鋅避雷器的全電流、阻性電流及其諧波、工頻參考電壓及其諧波、有功功率和相位差，大屏幕可顯示電壓和電流的真實波形。儀器運用數字波形分析技術，采用諧波分析和數字濾波等軟件抗干擾方法使測量結果準確、穩定，可準確分析出基波和3～7次諧波的含量，并能克服相間干擾影響，正確測量邊相避雷器的阻性電流。本機配有高速面板式打印機，可充電電池，試驗人員在現場使用十分方便。儀器采用獨特的高速磁隔離數字傳感器直接采集輸入的電壓、電流信號，保證了數據的可靠性和安全性。
產品別名
氧化鋅避雷器測試儀，氧化鋅避雷器特性測試儀，氧化鋅測試儀，避雷器阻性泄漏電流檢測儀，氧化鋅避雷器帶電測試儀
產品特性
1）NAYBL氧化鋅避雷器測試儀采用大屏幕液晶顯示，中英文菜單操作，使用簡便。
2）高精度采樣、處理電路，優良的付里葉諧波分析技術，確保數據更加可靠。
3）儀器采用獨特的高速磁隔離數字傳感器直接采集輸入的電壓、電流信號，保證了數據的可靠性和安全性。
4）支持無線同步電壓取樣方式。
5）具有阻性電流基波峰值輸出、邊相校正等功能。
6）儀器配有可充電電池、日歷時鐘、微型打印機，可存儲120組測量數據。
產品參數
全電流測量范圍 | 有效值 0—10mA，50Hz/60Hz | |
準確度：±（讀數×5%±5μA） | ||
阻性電流基波測量準確 度（二次法不含相間干擾） | ±（讀數×5%±5μA） | |
電流諧波準確度 | ±（讀數×10%±10μA） | |
參考電壓輸入范圍 | 有效值 25V—250V，總諧波含量＜30%，50Hz/60Hz | |
參考電壓測量準確度 | ±（讀數×5%±0.5V） | |
電壓諧波測量準確度 | ±（讀數×10%） | |
基波電流電壓夾角Φ | 0-360° | |
電池工作時間 | 主機6小時 | |
充電電源 | 220V±10% 50Hz/60Hz | |
充電時間 | 5小時 | |
主機體積 | 325mm×280mm×140mm | |
主機重量 | 3.5Kg(不含線纜) | |
工作環境 | 溫 度 | -10℃—50℃ |
濕 度 | ＜90% | |
NAYBL Zinc Oxide Arrestor Characteristics Test Device
Product introduction
NAYBL zinc oxide arrester detector is a special instrument for detecting electrical properties of zinc oxide surge arresters. The instrument is suitable for charging or power outage detection of various voltage levels of zinc oxide surge arresters, timely detection of equipment internal insulation damp and valve aging and other dangerous defects.
NAYBL zinc oxide arrester detector is simple and easy to operate, the entire measuring process is controlled by microcontrollers to measure the full current, resistive current and its harmonics, frequency reference voltage and its harmonics, active power and phase difference of zinc oxide surge arrester, a large screen can display the real waveform of voltage and current.
The instrument is adopt with digital waveform analysis techniques, used harmonic analysis and digital filtering software such as anti-jamming method to make the test result accurate and stable, it not only can accurately analysis the fundamental and the content of 3 to 7 times of harmonic, but also can overcome the influence of the interphase interference to rightly measuring the resistive current of edge phase arrester.
The instrument is equipped with high-speed printer panel, rechargeable battery, it is very convenient to test in the field. It uses a unique high-speed magnetic isolation digital sensor to directly collect the signal of input voltage and current, ensure the data reliability and security.
Also called name
Zinc oxide arrester tester, intelligent arrester tester, anti-interference characteristics of zinc oxide arrester tester, leakage current arrester resistive detector, zinc oxide arrester tester charged, zinc oxide surge arresters without gaps for ac tester, zinc oxide arrester tester
The Characteristics of the products
1.A large-screen LCD display, easy to operate.
2.Adopting high-precision sampling, processing circuitry, advanced Fourier harmonic analysis techniques to ensure the data is more reliable.
3.Using a unique high-speed magnetic isolation digital sensor to directly collect the signal of input voltage and current, ensure the data reliability and security.
4.Support wireless synchronization voltage sampling way.
5.With the function of fundamental peak output of resistive current, edge phase correction and so on.
6.The instrument is equipped with a rechargeable battery, calendar clock, mini printer, it can store 120 sets of measurement data;
The parameters of the products
(1) Measurement range of full current: 0-10mA RMS, 50Hz/ 60Hz; Accuracy: ± (reading x 5% + 5 μA)
(2) Measurement accuracy of fundamental resistive current (secondary law without interphase interference): ± (reading x 5% +5 μA)
(3) Accuracy of current harmonics: ± (reading x 10% +10 μA)
(4) Input range of reference voltage: 25V ~ 250V RMS, total harmonic content < 30%, 50Hz/ 60Hz
(5) Measurement accuracy of reference voltage: ± (reading × 5% +0.5 V)
(6) Measurement accuracy of voltage harmonics: ± (reading × 10%)
(7) The angle of fundamental current and voltage Φ: 0 ~ 360°
(8) Battery working time: Host 6 hours
Charging power: 220V ± 10% 50Hz/ 60Hz Charging time: 5 hours
(9) Dimensions: 325mm x 280mm x 140mm
(10) Weight: 3.5Kg (do not include cable)
(11) Operating environment: Temperature: -10-50 ℃ Relative humidity: < 90%
Product information
1, Taken from the PT secondary voltage reference, you should carefully check the wiring to avoid PT secondary circuit.
2, The voltage signal input line and the current signal input line must not be reversed, if the current signal input line connected to PT3, test transformer secondary side or measuring end, it may burn the instrument.
3, Where the input voltage and input current circumstances, do not plug the measuring line, so as not to burn the instrument.
4, The instrument is damaged, stop using it immediately and notify the Company and do not repair yourself out of the box. When the instrument is not working properly, first check the power fuse is blown. After replacement of the same model can continue the insurance experiment. If the problem is more complex, please contact me directly.
5, The instrument must not be placed in humid and high temperature environments.
6, The instrument is not used as a long time (more than three months), the battery will run out of damage, so each interval of 3 months should be given to the instrument one charge (6 hours or more), in order to ensure that the instrument can be used normally. Charging steps: Turn the power switch, plug in 220V power until the battery is indicating below the LCD screen 90% or more.
南澳電氣武漢公司 版權所有 NANAO ELECTRIC. Copyright ? 2004-2018, www.i2601.cn All Right Reserved. 備案號：鄂ICP備16008747號-2
服務熱線
